Page 1
Please inquire at the community administration for the authorized disposal location. ALL RIGHTS RESERVED COPY RIGHT DENVER ELECTRONICS A/S www.denver-electronics.com Please read this User Manual carefully to ensure proper use of this product and keep this manual for further reference.
Specifications Content Other Introduction DVD Player Type Safety Precautions Model MT-704 Important Safety Instructions Play mode NTSC/PAL Panel Illustration Disc mode DVD, CD, MP3, CD-R/W, HDCD, JPEG, DVD-R/W Remote Control Video characteristic Video S/N ratio 65dB Connections 500 lines Resolution...
Safety Precautions Troubleshooting Introduction Other If you have any questions, please consult the troubleshooting guide below. CAUTION: CAUTION THE UNIT EMPLOYS A LASER SYSTEM. TO EN- SURE THE PROPER USE OF THE UNIT, READ NO PICTURE OR SOUND "BAD DISC" DISPLAYED RISK OF ELECTRIC SHOCK THIS MANUAL CAREFULLY AND KEEP IT FOR DO NOT OPEN...
MP3 Playback Important Safety Instructions Advanced Features Introduction 1. Read Instructions 10. Ventilation Slots and openings in the cabinet are provided for All the safety and operating instructions should be read ventilation and to ensure reliable operation of the before the product is operated. OPERATION OF MP3 FUNCTION JPEG product and to protect it from overheating, and these...
Page 5
Important Safety Instructions Remote Control Operation Introduction Advanced Features 13. Overloading 17. Replacement Parts Do not overload wall outlets, extension cords, or When replacement parts are required, be sure the integral convenience receptacles, as this can result in a service technician has used replacement parts risk of fire or electric shock.
Remote Control Operation Panel Illustration Introduction Advanced Features ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. LANGUAGE MODE SETUP During DVD playback MENU...
Remote Control Remote Control Operation Advanced Features Introduction PROGRAM PLAY/PAUSE STEP MUTE DISPLAY MUTE PROG DISPLAY ON/OFF Press STEP during playback to pause playback. NTSC/PAL TFT POWER ON/OFF SUBTITLE NUMBER KEY SELECT Press STEP repeatedly to play frame. LANGUAGE TIME SUBTITLE Press PLAY to resume normal playback.
Remote Control Operation Connecting to a TV Set Advanced Features Connections PROG While [PROGRAM] is on, press ENTER to display the [Program] submenu: Input the track numbers in the order you would like them to play. When finished, select [ Play Program ] and then press Program Track ENTER to play the tracks in the new programmed order.
Remote Control Operation Connecting to an AV Amplifier with Audio Input Connections Advanced Features Press PLAY/PAUSE( ) from stop mode to start playback. Press PLAY/PAUSE( ) during playback to pause playback. Press PLAY/PAUSE( ) to resume normal playback. This function is not available if the elapsed time of current track is less than 10 seconds.
Basic Operation Remote Control Operation Basic Playback Advanced Features Preparation before playing: During DVD or CD playback, press and hold to scan forward. The player will review the disc at 2, 4, 8,16 and 32 times normal speed as follows: Press PLAY to resume normal playback.
Modes and Features Setup Remote Control Operation Advanced Features Advanced Features System settings TIME With no disc in the player, press [SETUP], the screen will display the SETUP MENU. Press [UP],or [DOWN] to move the highlighted band to the desired item, then press During playback, press TIME, and the [Track Search] menu will display as follows: [ENTER] to display sub-menu.
Page 12
Remote Control Operation Modes and Features Setup Advanced Features Advanced Features DISPLAY 2.Press [RIGHT] to enter the sub-menu on the right of the screen. Ifyou want to set the screen to "WIDE", press [DOWN] move the highlighted band to the "WIDE" During playback, press DISPLAY to display the current time counter position.
Page 13
Modes and Features Setup Remote Control Operation Advanced Features Advanced Features 0-10+ keys These keys are used to input the time, as well as title, chapter and track numbers. When a numeric item is displayed on the screen, press the 0-10+ keys to select the desired entry, and press ENTER to confirm.