Page 1
PDVD-12309 MTK1389Q方案(带EUP说明书) 纯DVD,不带红外耳机,模拟屏 标准说明书) PORTABLE DVD USER'S MANUAL MT-980 www.facebook.com/denverelectronics Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
Table of Contents Contents Table of Contents................P1 Important Safety Instructions............P2 Safety Precautions................P3 Identification of Controls............P4-P6 Main Unit...................P4 Insert the battery................P4 Remote control unit...............P5-P6 SETUP Menu Setting..............P7-P9 General Setup Page................P7 Audio Setup Page.................P7-P8 Video Setup Page................P8 Preference Page................P8-P9 Password Setup Page...............P9 Parameters and specifications............P10 Electronical parameters..............P10 System...................P10...
Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. the cover or back. There are no user-serviceable parts inside.
Safety Precautions WARNING Notes on Copyrights: RISK OF ELECTRIC SHOCK DO NOT OPEN It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without Warning: This digital video disc player employs a laser system. permission.
Identification of Controls Main Unit 1.REMOTE SENSOR 9.SETUP 2.VOL- / VOL+ 10. OPEN PLAY/PAUSE 11.SD/MMC/MS 4.■ STOP 12.USB 5.SOURCE 13. AV OUT 6. MENU Earphone Socket 7.ENTER 15. COAXIAL 8.▲/▼/◄/►(up/down/right/left) 16.ON/OFF Select an item in the menu.OK key 17.DC IN 9-12V confirms menu selection.
Identification of Controls Remote control unit 5.10+ BUTTON In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button. STEP MUTE SOURCE 6. MENU/PBC Return to DVD root menu(DVD). PBC on/off switch (VCD) .
Page 7
Identification of Controls Remote control unit 26.PROGRAM BUTTON DVD/VCD:The program function enables you to store your Press BUTTON allow skipping back at 5-level speed(X2->X4-> X8->X16->X32->PLAY), press PLAY button return to normal favourite tracks from the disc. Press PROGRAM button ,then playback.
SETUP Menu Setting General Setup Page Press SETUP button to get the setup menu. Use direction buttons Angle Mark Displays current angle setting information on the right hand corner to select the preferred item. After finishing settings, press of the TFT screen if available on the disc. SETUP again to normal display.
SETUP Menu Setting Audio Setup Page Video Setup Page Video Setup Page Downmix This options allows you to set the stereo analog output of your DVD Player. - - VIDEO SETUP PAGE - - LT/RT :Select this option if your DVD Player is connected to a SHARPNESS HIGH Dolby Pro Logic decoder.
SETUP Menu Setting Password Setup Page Preference Page Password: select the menu password change page. PAL - Select this if the connected TV is PAL system.It change will video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format.
Parameters and specifications Electronical parameters Battery Parameters Battery Specifications: Item Standard requirement Output:7.4V Power requirements : AC 100-240 V , 50/60 Hz Charge / Discharge Time: Power consumption Standard charge time:3h ~ 4h : <10W Storage and work circumstances: Operating humidity : 5 % to 90 % 1.