Viewing Form Another Angle; Using The Title Function; Using The Menu Function - Denver MT-908 Instruction Manual

Convenient functions-continued
Viewing from another Angle
Some special featured DVD discs may contain scenes which have been shot
simultaneously from a number of different angles. For these discs, the same scenes
can be viewed from different angles using the <ANGLE> button. (The recorded angles
vary depending on the disc programming.)
1. Press <ANGLE> during playback.
2. Press it until the preferred viewing angle is selected.
Press <ANGLE> button to change the viewing angle.
<< NOTE >>
ANGLE will only function on discs where different angles have been recorded.
●
The viewing angles are shown on the player's display and you can select one from
●
them for viewing.

Using the TITLE Function

Certain DVD discs have unique menu structures called DVD menus. For example,
DVDs programmed with complex content provide guide menus, and those recorded
with various languages provide menus for audio and subtitle language. Although the
DVD menu's contents and operation vary from disc to disc, the following explains basic
operation when this feature is used.
1. Press <TITLE>
The DVD menu available on the disc will appear.
2 Press <UP>, <DOWN>, <LEFT>, <RIGHT> buttons to select the preferred item.
3 Press <ENTER>.
To enter the selected item.

Using the MENU Function

1. Press <MENU>.
A DVD chapter menu with a still image will appear. You may view the introduction of
each chapter and then decide with which chapter to select.
2. Press <UP>, <DOWN>, <LEFT>, <RIGHT> buttons or number button(s) to select
the preferred item.
<< Note: The menu details vary depending on discs recorded. >>
3. Press <ENTER>.
To enter the selected item.
18