Installing The X6V; Windows Installation - Zoom ADSL X6v User Manual

Installing the X6v

Macintosh and Linux users: please go to page 11.
Important! If possible, use a computer that is centrally located in
your home or office and that has easy access to an DSL line. A
central location helps assure good wireless performance. If you do
not have a desktop computer located centrally in your home (if, for
example, the desktop is in the basement), or you only have
notebook computers, you should still directly connect this desktop
computer or one of your notebooks to the X6v to configure it.
Once the X6v is set up and your Internet connection is working,
you can unplug the computer from the unit and move the X6v to a
more central location.

Windows Installation

Windows users can quickly install the software and hardware and
configure the X6v using Zoom's multilingual Installation Assistant
on the CD. If you have already run the Installation Assistant, please
go to Setting Up a Wired Network on page 23.
If you encountered a problem using the Installation Assistant,
follow the instructions for Macintosh and Linux users starting on
page 11.
1
Turn your computer on.
For Windows Vista only, follow these steps to turn on Telnet
Client:
•
Click Start, select Control Panel, then double-click
Programs and Features.
•
In Programs and Features, in the Tasks pane, click Turn
Windows features on or off.
•
At the User Account Control message, click Continue.
•
In the Windows Features dialog box, select Telnet
Client, click OK, and wait while the feature is configured.
•
In the Uninstall or Change a Program window, click the
Close box to exit.
Chapter 1: Installation Instructions 9