Safety Instructions - Marshall Electronics CV620-BK2 Installation Manual

Safety Instructions

Always follow these safety instructions when setting up and using the Camera:
1. Use attachments only as recommended.
2. Use the type of power source indicated on the Camera. If you are not sure of the type of
power available, consult your distributor or local electricity company for advice.
3. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire:
 Ensure the plug is free of dust before inserting it into a socket.
 Ensure that the plug is inserted into the socket securely.
4. Do not overload wall sockets, extension leads or multi-way plug boards to avoid
potential risks.
5. Do not place the Camera where the cord can be stepped on as this may result in
fraying or damage to the lead or the plug.
6. Do not block the slots and openings in the case of this Camera. They provide
ventilation and prevent the Camera from overheating. Do not place the Camera on the soft
surfaces of sofas, carpets, or other similar surface.
7. Never push objects of any kind through cabinet slots. Never allow liquid of any kind to
spill into the Camera.
8. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous voltages
and other hazards. Refer all servicing to licensed service personnel.
9. Unplug the Camera during thunderstorms or if it is not going to be used for an
extended period. Do not place the Camera or remote control on top of vibrating equipment
or heated objects such as a car, etc.
10. Unplug the Camera from the wall outlet and refer servicing to licensed service
personnel when the following situations happen:
 If the power cable or plug becomes damaged or frayed.
 If the Camera is wet with liquid, rain, or water.
*Note
Using an incorrect battery type in the remote control may result in breakdown. Follow local
instructions on how to dispose of used batteries
4