I Would Like To Set The Image Mode; I Would Like To Freeze Images; I Would Like To Rotate The Image; I Would Like To Change The Camera Direction - Marshall Electronics CV620-BK2 Installation Manual

6. Press [] or [] to select [High / Middle / Low].
7. Press [MENU] to exit.

6.10 I would like to set the image mode

1. Press [Picture] on the remote control to switch [Off / Neg / B&W].

6.11 I would like to freeze images

1. Press [Freeze] on the remote control to freeze the current image on
the display.

6.12 I would like to rotate the image

1. Press [Mirror] on the remote control to switch [Off / Mirror / Flip / Mirror
+ Flip].

6.13 I would like to change the camera direction

1. Press [L/R Direction Set] on the remote control to switch [L/R
Direction / Off / Normal].

6.14 I would like to display the current status

1. Press [Info] on the remote control to display the current status
information.

6.15 I would like to reset to the original setting

1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Factory Reset].
5. Press [ENTER] to activate.
6. Press [] or [] to select [On].
7. Press [ENTER] to execute.
31