Instruction For Installation; Preparation Before Installation - Marshall Electronics CV620-BK2 Installation Manual

Instruction for Installation

4.1 Preparation before installation

Installation and connection of the Camera requires special skills. To install by
yourself, please follow necessary steps, ensure steady and tight installation of
the device, and pay attention to your safety to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do
not install this device on an unstable ceiling or in a place
where the device is in danger of falling to avoid any
accident.
4.1.2 Please check whether accessories in the box are complete
or not. Please contact the supplier for any shortage, and
make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of the Camera
in advance. Please determine an installation place
according to the following requirements:
4.1.1.1 Confirm the position for the object to be captured.
4.1.1.2 Confirm whether the Camera is set at a proper distance from
other light sources.
4.2 Instructions for installation
4.2.1 I would like to install CV620-BK2/WH2 on a desk
Precautions for installation
4.2.1.1
 Please install the machine on a flat desk
 Do not grab the camera head by hand when handling the device
 Do not rotate the camera head by hand. Improper rotation may
result in breakdown of the camera
8