Marshall Electronics CV620-BK2 Installation Manual page 15

4.2.2.5 Precautions for installation
1. Before installation, please confirm the orientation of the
machine relative to the object to be captured.
2. It is recommended that the machine should be set at a distance
of more than 1 meter away from the object to be captured.
Please adjust for a best distance according to the magnification
of the lens.
3. The machine (including metal plates) is weighed at about 2.5 kg.
If it is to be installed on the ceiling, please use the hanger that
has obtained UL security approval to prevent the machine from
falling down.
4. Please check whether the camera is installed securely on a
regular basis.
4.2.2.6 Installation steps
1. Please adjust resolution on DIP switch at first
*Please refer to
descriptions on DIP switch.
2. Fix the metal plate A on the machine base with 4 M3 silver
screws
1 meter↑
Chapter 7 DIP Switch Setting for the relevant
14