Table of Contents
Advertisement
Copyright © May 2012, Marshall Electronics, Inc.
All Rights Reserved. This document may not be copied.
Trademarks
Other trademarks used in this document are registered trademarks or manufacturer or vendor
trademarks associated with the products.
Disclaimer
Product options and specifications can be changed without notice. The information in this
manual is furnished for informational use only and should not be construed as a commitment
by Marshall Electronics, Inc. Marshall Electronics, Inc. assumes no responsibility or liability for
any errors or inaccuracies that may appear in this publication.
Before installing the product, please read the following with care
Make sure to turn off the power before installing the system.
Do not install under the direct sunlight or in dusty areas.
Make sure to use the product within the temperature and humidity specified.
Do not operate the product in the presence of vibrations or strong magnetic fields.
Do not put electrically conducting materials in the ventilation hole.
Do not open the top cover of the products. It may cause a failure or electric shock on the
components.
To prevent from overheating, make sure to keep the distance at least 10 cm from the ventilation
hole.
Make sure proper voltage before connecting the power.
VS-WM202-HDSDI – V 1.3.0
Safety Precaution
We appreciate your IP Camera Purchase.
Page 2 of 48
.
9/28/12
Advertisement
Table of Contents
