Product Safety Information; Product Specifications - Ingersoll-Rand 215G Product Information

Product Safety Information

Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction of
maximum output power in either the forward or the reverse direction.
For reduced power in the forward direction and full power in the reverse direction, push
the reverse valve inward on the right side of the tool and rotate the reverse valve until the notch
on the right side aligns with the desired number on the right side. This provides reduced power
in forward but full power in reverse when the reverse valve is pushed in the opposite direction.
(See TPD1248 on page 2.)
For reduced power in the reverse direction and full power in the forward direction, push
the reverse valve inward on the left side of the tool and rotate the reverse valve until the notch
on the left side aligns with the desired number on the left side. This provides full power in
forward but reduced power in reverse when the reverse valve is pushed the opposite direction.
(See TPD1249 on page 2.)
For full power in both directions, rotate the Reverse Valve until the notch on either end of the
Reverse Valve aligns with 5 on each side of the housing.
The power level indicators (See TPD1248 and TPD1249) are for reference and DO NOT indicate
a specific power. The power output can be further reduced in forward or reverse by using the
variable throttle.

Product Specifications

Recommended
Drive
Torque Range
Model
Size
ft-lbs
215G 3/8" 20-125 27-170 160 217
Air
Consumption
Model
@ Load
cfm l/min † Pressure (L
215G 16 453
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertanity
46805370_ed2
Max.
Maximum
Torque
Free Speed
(Reverse)
Nm ft-lb Nm rpm
11300
Impacting
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
92.3 103.3
Blows
Tool Overall
Per
Weight Length
Minute
BPM lbs Kg in mm cfm
1500 3.0 1.4 5.9 151
Free Speed
Sound Level dB (A)
(ISO15744)
) † Pressure (L ) ‡ Power (L
w p
97.0
EN
Average Air
Consumption
l/min
3 85
Vibration
(ISO28927)
m/s²
) Level * K
w
108.0 6.4 1.0
EN-1