Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll-Rand 2136QXPA Product Information

Product Safety Information

Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information, refer to Air Impact Wrench Product Safety Information Manual
Form 04580916.
Manuals can be downloaded from ingersollrand.com
Power Management System
For models that include a power management system, the system allows operator reduction
of maximum output power in the forward direction. The power management system does not
affect the output power in the reverse direction.
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power
output can be further reduced in forward or reverse by using the variable throttle.

Product Specifications

Model Style
2136QXPA Pistol
Sound Level dB(A)
Model
† Pressure (L
2136QXPA 90.7
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valves at low points of piping, air filter and compressor tank daily. Install a properly
sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose coupling
without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects. See
drawing 47132782 and table on page 2. Maintenance frequency is shown in a circular arrow and
defined as h=hours, d=days, and m=months of actual use. Items identified as:
47796737_ed2
Drive
Type Size
Square 1/2"
Impacting
(ISO 15744)
) ‡ Power (L ) † Pressure (L
p w
101.7
WARNING
Impacts
per min.
Forward
ft-lb (Nm)
700 MAX
1,250
(949 MAX)
Free Speed
Sound Level dB(A)
(ISO 15744)
) ‡ Power (L
p
86.0 97.0
* K = Vibration measurement uncertainty
EN
Recommended
Torque Range
Nut Busting
ft-lb (Nm)
1106 MAX
(1500 MAX)
Vibration
(m/s²)
(ISO 28927)
) Level *K
w
13.3 4.6
EN-1