Operation
Set point correction switch
Changes remain effective until the switch position is changed again
1.2
Operating modes
Day mode (rated operation) (
The set points set for rated operation are constantly used by the controller irrelevant of the
programmed time-of-use or summer mode.
Stand-by operation (
The ventilation is deactivated. The frost protection is active.
Manual operation (
Manual operation of valves and pumps.
8
EB 5477 EN
–: Set point reduction in 1 °C increments per notch
0: No change in set point
+: Set point increase in 1 °C increments per notch
)
)
)