Table of Contents
Advertisement
Start-up
2.3
Changing parameters
Depending on the system code number set and the active functions, not all the parameters
are accessible which are listed in the parameter lists in the appendix (−> section 12.2).
How to proceed:
Change to the configuration and parameter level.
PA appears on the display.
Press the enter key.
The time appears on the display.
Select the parameter you want to set.
Access the parameter.
Change the parameter.
Confirm the new parameter.
Repeat the steps in the gray box to set other parameters.
Press both arrow keys simultaneously to exit the parameter level.
Return to the operating level.
Note!
The controller automatically returns to the operating level when keys are left unpressed for
longer than two minutes.
20
EB 5477 EN
Advertisement
Table of Contents
