Auto-Calculated Methods - eXact iDip Smart Manual

AUTO-CALCULATED METHODS

21
Visit exactidip.com or exactidip570.com for complete test instructions.
LANGELIER SATURATION INDEX (LSI)
Refer to the Instructions and Videos (see Page 15) and
perform tests for Alkalinity, Total; Calcium; and pH. Then,
obtain TDS and Temperature results via alternate means.
Open the slide-out menu and tap Manual Test. Tap
Temperature and enter the value obtained. Tap Save in
the top left. Tap Total Dissolved Solids (TDS) and enter
the value obtained. Tap Save in the top left. Lastly, tap
Results at the bottom of the page and an LSI value will be
calculated and displayed automatically.
TOTAL CHLORINE
Refer to the Instructions and Video (see Page 15) and
perform test for Chlorine, Free/Combined/Total. Then, tap
Results at the bottom of the page and a Total Chlorine value
will be calculated automatically.
COMBINED CHLORINE
Refer to the Instructions and Videos (see Page 15) and
perform tests for Free Chlorine and Total Chlorine. Then, tap
Results at the bottom of the page and a Combined Chlorine
value will be calculated automatically.
MANUAL ENTRY
This feature allows you to utilize other testing methods and
manually enter your results into the app. Begin by selecting
'Test', 'Manual Entry', select your desired test. Enter the value
obtained. Once fi nished, tap 'SAVE' at the top left. If the test
you need to enter is not available on the list, tap 'Custom*'.
Enter the type of test that was run, the value obtained, and the
unit of measure used. Then, tap 'SAVE' at the top left.
exactidip.com