Auto-Calculated Methods - eXact iDip Smart Manual

20

AUTO-CALCULATED METHODS

Visit exactidip.com or exactidip570.com for complete test instructions.
MAGNESIUM HARDNESS
Refer to the Instructions and Videos (see Page 15)
and Perform tests for Total Hardness and Calcium
Hardness. Then, tap Results at the bottom of the page
and a Magnesium Hardness value will be calculated and
displayed automatically.
RESIDUAL ALKALINITY
Use the procedure above to obtain a Magnesium Hardness
value. Then Refer to the Instructions and Videos (see Page
15) and perform the test for Total Alkalinity. Lastly, tap
Results at the bottom of the page and a Residual Alkalinity
value will be calculated and displayed automatically.
SODIUM
Use the procedure above to obtain a Residual Alkalinity
value. Refer to the Instructions and Videos (see Page 15)
and perform tests for Chloride and Sulfate. Lastly, tap
Results at the bottom of the page and a Sodium value will
be calculated and displayed automatically.
If you would like to obtain all three test results listed above,
you can perform all required tests (Total Hardness, Calcium
Hardness, Total Alkalinity, Chloride, and Sulfate) and then go
to Results. At this point, all three values will be automatically
calculated simultaneously (see below).
©2017, Industrial Test Systems, Inc. Printed in USA