Dispensing Multiplicator Products; Multiple Dispensing Of A Single Product; Batch Mode - Melitta Cafina XT8 Operating Instructions Manual

6�9

Dispensing multiplicator products

Under product settings (see chapter 7.5 on page 25),
you can set up products as multiplicator products. With
this you can issue multiple portions of a product in suc-
cession if required, for example, to fill a larger cup.
Note
In order to dispense a multiplicator product,
there must be enough product material and
capacity in the coffee grounds drawer.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
͵ While the product is being dispensed, the display
shows how many single products are included in
the multiplicator product and which single prod-
uct is currently being dispensed (e.g., "1 / 4", the
first product of four single products).
͵ The products are prepared and dispensed in suc-
cession.
9 The dispensing of the multiplicator product is
complete.
6
6�10

Multiple dispensing of a single product

Multiple portions of a product can be requested as
necessary and dispensed directly in sequence. The
advantage of multiple dispensing is that you do not need
to select the product again for every subsequent portion.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
3. While the product is being dispensed, press "+"
multiple times in succession depending on the
number of additional portions that you would like to
dispense.
͵ The products are prepared and dispensed in suc-
cession.
4. Once a portion has been dispensed, put the cup aside
and place another cup underneath the beverage
outlet.
9 The multiple dispensing operation is complete.
Dispensing products
20
6�11

Batch mode

If this function is enabled by customer service, you can
preselect several products with the batch mode and
dispense them in sequence.
Café Crème
Espresso
***
Steam
Hot water
Depending on the preset in the manager menu (see
chapter 7.1 on page 22), the batch mode (1) can be
open or closed by default.
To open or close the batch mode manually, press the
symbol "«" (open) or "»" (close) (3) to the right of the
lower bar.
Product dispensing in batch mode
1. With the batch mode open, press the products to be
dispensed in sequence.
2. Press the "" button (2) on the display to start dis-
pensing the first product.
Please remove
Fig. 27: Dispensed product in batch mode
3. Once a product has been dispensed from the batch,
remove it and position a suitable container for
the next product underneath the corresponding
beverage outlet.
Café Crème
Latte Macchiato
Cappuccino
**
Espresso
Ristretto
***
***
1
Cappuccino
2
Milk foam
cold
3
Fig. 26: Batch mode
Cappuccino
**
Espresso
***
1
2
28514 • 20170301