Table of Contents
Advertisement
6�3
Dispensing coffee products
1
2
1. Pull the beverage outlet (1) upwards so that the
required cup fits underneath.
2. Position the cups, pots, or glasses underneath the
beverage outlet on the drip grid (2).
3. Move the beverage outlet downwards until just over
the cup edge.
4. Press the corresponding product button on the
display.
9 The product is dispensed.
6�4
Dispensing hot water (option)
Note
If there is no hot water wand fitted, hot water
is also dispensed via the beverage outlet.
During a brewing, hot water will be dispensed
with interruptions only.
1
2
32743 • 20190801
Fig. 15: Dispensing products
Fig. 16: Dispensing hot water
Dispensing products
1. Hold the cup underneath the hot water wand (1) or
position it underneath the wand on the drip grid (2).
2. On the display, press the button for dispensing hot
water.
9 The product is dispensed.
6�5
Dispensing coffee via quantity outlet
(option)
Depending on the equipment, a quantity outlet may be
available. With the quantity outlet, you can dispense
coffee in larger receptacles (e.g. pots).
1
2
Fig. 17: Dispensing coffee via the quantity outlet
1. Position the receptacle underneath the quantity
outlet (1) on the drip grid (2).
2. On the display, press the corresponding product
button for a product via the quantity outlet.
9 The product is dispensed via the quantity outlet.
17
6
Advertisement
Table of Contents
