Dispensing Products; Placing The Vessel; Product Selection; A) Dispensing An Individual Product - Melitta fully automatic coffee maker Operating Instructions Manual

7. 7. 7. 7. Dispensing products

Dispensing products Dispensing products Dispensing products
As soon as the machine is heated up, the products
that can be currently dispensed are shown in the
display. If products are not available, e.g. because of
a shortage (chapt. 12), they will not be displayed.
1

7.1 Placing the vessel

You can place the individual cups centrally un-
der the spout for coffee/ instant products or
hot water, or you can stand two cups next to
each other, ...
(3) small cups on top of the cup tray by folding it
down.
(2) large cups, pots or glasses on the drip grill
below by folding the cup tray up.

7.2 Product selection

Depending on the presetting by customer service you
can cancel the product output by releasing (mo-
mentary contact) the product button or by pressing it
again (locking)
a) Dispensing an individual product
To dispense a coffee/ instant product or hot
water press the button next to the respective
product depiction in the display.
b)
If enabled by customer service, you can dispense
coffee/ instant products or hot water as ...
2
8
Dispensing a twin product
Dispensing double products: By a single push
of the button next to a double product, it is dis-
pensed into two small cups side by side or into
one large cup.
Repeating single / double products: By push-
ing the button repeatedly, the selected product is
dispensed several times in sequence. The
remaining number is shown in the display.
When the symbol "Cancel" is displayed, you can
reduce the number of products to be dispensed
always by "1" by pressing the button below and
finally cancel the running output.