Switching The Instant System On And Off; Dispensing Products; Setting For Product Dispensing - Melitta Cafina XT4 Operating Instructions Manual

5�6 Switching the instant system on and off
(option)
Use the "Switch OFF instant system" function for the
situation where no instant products are being dispensed
or you want to take instant preparation out of service
temporarily.
1� On the control unit, press the button until the
basic menu is displayed.
͵ A password must be entered first according to the
operating mode.
Turn ON
Rinse instant mixer
Pre-heating
brewing system
Cleaning
5
Login
6
2� Press the "Switch OFF instant system" button (1).
͵ All instant products are removed from the display.
Note
The products are only available again once
the instant system has been switched back on
again�
3� In the basic menu, press the "Switch ON instant
system" button.
͵ After switching on the instant system, the prompt
"Switch ON instant system and rinse instant
mixer?" appears. If confirmed with "Yes", the
mixer unit is rinsed�
CAUTION
Risk of burns on the beverage outlet!
Hot water runs out of the beverage outlet when the
mixer unit is rinsed�
• Do not reach underneath the beverage outlet.
4� Fill the instant powder as described in Chapter 5�2�2
on page 11�
9 The instant system is ready for use.

Dispensing products

Hopper fill levels
Switch OFF
milk system
Switch OFF 1
instant system
Additional options
Fig� 14: Switch OFF instant system
14
6 Dispensing products
Note
Before dispensing products, all supply con-
tainers must be inserted and filled as otherwise
no more products can be dispensed�
Once the machine has heated up, the products are shown
on the display that can be dispensed. Products that are
not available due to a fault are not shown on the display.
CAUTION
Risk of burns due to hot products!
Contact with the product dispensed can result in burns�
• Do not reach underneath the outlets during
operation.
6�1 Setting for product dispensing
Depending on the settings by customer service, the
following presets are possible for product dispensing:
Touch Dispensing is carried out for as long
operation as the button is held down.
Rest Dispensing of the set quantity.
operation
Stop mode Dispensing is carried out until
the cancel button is pressed or
the maximum preset quantity is
reached�
28429 • 20150501