Dispensing Quick Start Products; Dispensing Multiplicator Products; Multiple Dispensing Of A Single Product - Melitta CAFINA XT5 Operating Instructions Manual

Hide thumbs Also See for CAFINA XT5:
Table of Contents

Advertisement

6�8

Dispensing quick start products

Depending on the preset in the manager menu (see
chapter  7.1 on page  24), you can use the quick start
buttons to dispense preset products (e.g., hot water,
steam) either directly after the currently running product
component or (steam only) in parallel with normal
product dispensing.
Cappuccino
**
Fig. 24: Product dispensing with quick start buttons
1. During product dispensing press the symbol for the
product (2) that you wish to additionally dispense in
parallel or directly following the product component
currently being dispensed.
9 The product is dispensed.
39663 • 20220101
6�9

Dispensing multiplicator products

Under product settings (see chapter  7.5 on page  27),
you can set up products as multiplicator products. With
this you can issue multiple portions of a product in suc-
cession if required, for example, to fill a larger cup.
Note
In order to dispense a multiplicator product,
there must be enough product material and
capacity in the coffee grounds drawer.
1
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
͵ While the product is being dispensed, the display
shows how many single products are included in
the multiplicator product and which single product
is currently being dispensed (e.g., "1 / 4", the first
product of four single products).
2
͵ The products are prepared and dispensed in suc-
cession.
9 The dispensing of the multiplicator product is
complete.
6�10

Multiple dispensing of a single product

Multiple portions of a product can be requested as
necessary and dispensed directly in sequence. The
advantage of multiple dispensing is that you do not need
to select the product again for every subsequent portion.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
3. While the product is being dispensed, press "+"  (1)
(see Fig. 24) multiple times in succession depending on
the number of additional portions that you would like
to dispense.
͵ The products are prepared and dispensed in suc-
cession.
4. Once a portion has been dispensed, put the cup aside
and place another cup underneath the beverage outlet.
9 The multiple dispensing operation is complete.
Dispensing products
21
6

Advertisement

Table of Contents
loading

Table of Contents