Table of Contents
Advertisement
h) Setting brew volumes
These functions are only available if activated by our
Technical Service staff (page 17):
Keep the
❍
!
ges appear ...
–
"Storage volume" if the key is pressed once:
the machine attempts to maintain the selected
volume in the storage urn by repeated
brewing.
–
"Coffee jug filling" if the key is pressed two
times. This is described in detail on page 17.
–
"ON / OFF" if the key is pressed three times.
This is described in detail on page 17.
GB
If the key is pressed again, the selection process
returns to the beginning.
When the "Storage volume" menu appears ...
use keys 6 (+) and 7 (-) ...
❍
to adjust the brew volumes indicated ...
➀
in steps of 0.5 l up to 3.0 l minus the remaining
❍
amount currently still in the storage urn.
The machine starts the brewing operation when
you leave this menu, e.g. by pressing ...
key 8 (enter), if you have made changes and
❍
these changes are to be stored.
key 4 (escape), if you have made no changes
❍
and nothing is to be stored.
10. Dispensing products
If the machine has been set up for dispensing in
accordance with these operating instructions, the
brewing process will start automatically. As soon as an
amount has been brewed which can be dispensed,
the following appears ...
the "Brewing active" symbol coffee can be
➁
taken, but the storage urn continues to be filled.
the "Brewing inactive" symbol coffee can be
➂
taken as long as a storage amount is indicated in
the storage urn.
key pressed. The following messa-
Storage volume
Esc
➀
➁
14
- 3l
+
-
- 2l
-
–
- 1l
-
Enter
!
➂
Advertisement
Table of Contents
