Table of Contents
Advertisement
5. Align the orange arrow on the camera base to the orange arrow on the mounting adapter, then press the
camera base into the mounting adapter. The camera base clicks into place and is held securely.
(Optional) Using the USB Wi-Fi Adapter
If you have a USB Wi-Fi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the camera's
mobile web interface.
After you connect to the Wi-Fi signal broadcast by the adapter, you can access the mobile web interface from
any mobile device using the following address:
http://camera.lan
For more information about configuring the camera from the mobile web interface see Avigilon USB Wi-Fi
Adapter System User Guide.
NOTE: The camera will reserve the 10.11.22.32/28 subnet for internal use while the USB Wi-Fi Adapter is plugged in.
Assigning an IP Address
The camera automatically obtains an IP address when it is connected to a network.
NOTE: If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
The mobile web interface using the USB Wifi Adapter. For more information, see (Optional) Using the USB
l
Wi-Fi Adapter above.
Camera's web browser interface: http://<camera IP address>/.
l
Network Video Management software application (for example, the Avigilon Control Center™ software).
l
ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method on
l
page 24.
NOTE: The default camera username is administrator with no password.
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
(Optional) Using the USB Wi-Fi Adapter
16
Hide quick links:
Advertisement
Table of Contents
