4 screws (#8 x 1.25)
l
RJ-45 grommet piercing cap
l
Teflon sealing tape
l
Installation Steps
Complete the following steps to install the camera:
Removing the Dome Cover
NOTE: Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may affect the
overall image quality. Keep the protective covers on the outside of the dome bubble until the installation is
complete.
Remove the dome cover by releasing the elastic strap holding the dome cover to the camera base.
l
Installation Steps
9
10
11
12
15
16
16
16
17
18
19
19
19
9