Installing The Camera Base To The Mounting Adapter - Avigilon 1.3C-H4SL-D1 Installation Manual

8. Carefully tighten the lock nut until the NPT adapter is secured to the wall mount.

Installing the Camera Base to the Mounting Adapter

After you install the mounting adapter, mount the camera base to the adapter.
1. Attach the lanyard on the mounting adapter to the anchor on the camera base.
2. Pull the required Ethernet cable through the cable entry hole on the camera base.
3. Install the grommet into the cable entry hole on the camera base.
Make sure the grommet flange is securely seated on the inside and outside of the cable entry hole.
4. Connect the cable to the Ethernet port.
The Link LED will turn on once a network link has been established.

Installing the Camera Base to the Mounting Adapter

15