Avigilon 1.0-H3-DC1 Installation Manual
High definition h.264 ip dome camera
Hide thumbs
Also See for 1.0-H3-DC1:
- Installation manual (150 pages) ,
- Installation manual (150 pages)
Related Manuals for Avigilon 1.0-H3-DC1
Summary of Contents for Avigilon 1.0-H3-DC1
- Page 1 Installation Guide Avigilon High Definition H.264 IP Dome Camera Models: 1.0-H3-DC1, 1.0-H3-DC2, 1.3L-H3-DC1, 2.0-H3-DC1, 2.0-H3-DC2, 3.0W-H3-DC1, 3.0W-H3-DC2, 5.0-H3-DC1 and 5.0-H3-DC2 920-0085A-Rev1...
- Page 3 Do not expose to rain or moisture. • For indoor use only. If used outdoors, an approved outdoor mounting adapter or enclosure is required. Consult with Avigilon for more information. • Installation must be performed by qualified personnel only, and must conform to all local codes.
- Page 4 • Any external power supply connected to this product may only be connected to another Avigilon product of the same model series. External power connections must be properly insulated. • Do not connect directly to mains power for any reason.
- Page 5 Changes or modifications made to this equipment not expressly approved by Avigilon Corporation or parties authorized by Avigilon Corporation could void the user’s authority to operate this equipment. Disposal and Recycling Information When this product has reached the end of its useful life, please dispose of it according to your local environmental laws and guidelines.
- Page 6 European Union: This symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free.
- Page 7 The contents of this manual and the specifications of this product are subject to change without notice. Avigilon reserves the right to make changes without notice in the specifications and materials contained herein and shall not be...
-
Page 9: Table Of Contents
Table of Contents Overview ........1 Cover View ........1 Bottom View . -
Page 11: Overview
Overview Cover View Dome Cover Tamper Proof Screws Feature Description Dome Cover Vandal proof dome cover constructed out of plastic with a polycarbonate bubble. Tamper Proof Screws TORX tamper-resistant captive screws to fix the dome cover to the base. -
Page 12: Bottom View
Bottom View Cable Entry Hole Ceiling Panel Clamps Serial Number Label Feature Description Cable Entry Hole An entry hole for network, power and I/O cables. Ceiling Panel Clamps Clamps for securing the dome camera to the ceiling panel. Serial Number Tag Product serial number and part number label. -
Page 13: Front View
Front View Azimuth Control Tilt Lock Thumb Screw Link LED Pan Lock Thumb Connection Status LED Screw Ethernet Port Power Connector Block I/O Terminals Audio/Video Connector Feature Description Tilt Lock Thumb Provides a locking mechanism for the image tilt Screws adjustment. -
Page 14: Rear View
Rear View SD Card Slot Feature Description SD Card Slot Accepts an SD card for onboard storage. See Mounting the Dome Camera on page 6 for more information. -
Page 15: Installation
Small slotted screwdriver with 5/64” or 2 mm blade width — for connecting power when not using Power over Ethernet. Camera Package Contents Ensure the package contains the following: • Avigilon High Definition IP Dome Camera • Terminal block • T20 TORX tamper resistant key •... -
Page 16: Mounting The Dome Camera
Mounting the Dome Camera Perform the following steps to mount the dome camera to the ceiling: Use the hole template to cut a 140 mm (5.5”) hole in a ceiling panel. Insert the dome camera into the hole, and pull the cables through the dome camera’s cable entry hole. -
Page 17: Connecting Cables
Connecting Cables Refer to the diagrams in the Overview section for the location of the different connectors. To connect the cables required for proper operation, complete the following: If there are external input or output devices that need to be connected to the camera (for example: door contacts, relays, etc), connect the devices to the camera I/O Terminals. -
Page 18: Assigning An Ip Address
(Zeroconf) is used to choose an IP address. When the IP address is set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet. The IP address settings can be changed using one of the following methods: • Avigilon Camera Installation Tool software application. • Camera's web browser interface: http://<camera IP address>/ •... -
Page 19: (Optional) Configuring Onboard Storage
(Optional) Configuring Onboard Storage To use the camera’s onboard storage feature, you must insert an SD card into the SD card slot. Avigilon offers a line of SD cards that have been fully tested with this camera to ensure optimal SD card performance. -
Page 20: Focusing The Dome Camera
• In the Avigilon Camera Installation Tool or camera web browser interface, use the camera’s Image and Display settings to focus the camera lens. Click the Auto Focus button to focus the lens. -
Page 21: Cable Connections
Cable Connections Connecting External Power NOTE: Do not perform this procedure if Power over Ethernet (POE) is used. If PoE is not available, the dome camera needs to be powered through the removable power connector block. Refer to the diagrams in this guide for the location of the power connector block. -
Page 22: Connecting To External Devices
Connecting to External Devices External devices are connected to the camera through the I/O terminal. The pinout for the I/O terminal is shown in the following table and diagram. Table:External I/O Terminals Function Description Ground Ground Input To activate, connect the Input to the Ground pin. To deactivate, leave disconnected or apply between 3-15 V. -
Page 23: Connecting To Microphones, Speakers And Video Monitors
When the camera flicker control is set to 60 Hz, the video output signal is NTSC. When the flicker control is set to 50 Hz, the video output signal is PAL. Use the Avigilon Camera Installation Tool to configure the camera’s flicker control in the Image and Display setup. -
Page 24: Led Indicators
LED Indicators Once the camera is connected to the network, the Connection Status LED will display the camera’s progress in connecting to the Network Video Management software. The following table describes what the LEDs indicate: Table:LED Indicators Connection Connection Description State Status LED Obtaining IP... -
Page 25: Reset To Factory Default Settings
Reset to Factory Default Settings If the camera no longer functions as expected, you can choose to restore the camera to its factory default settings. Use the firmware revert button to reset the camera. Firmware Revert Button Figure: The firmware revert microswitch on the side of the dome camera. -
Page 26: Setting The Ip Address Through The Arp/Ping Method
Setting the IP Address Through the ARP/Ping Method Complete the following steps to configure the camera to use a specific IP address: Locate and copy down the MAC Address (MAC) listed on the Serial Number Tag for reference. Open a Command Prompt window and enter the following commands: arp -s <New Camera IP Address>... -
Page 27: Specifications
Specifications H3-DC1 H3-DC2 Camera Audio Input Line input, A/V mini-jack (3.5 mm) Video Output NTSC/PAL, A/V mini-jack (3.5 mm) Lens 3-9mm, F1.2, P-iris 9-22mm, F1.6, P-iris Onboard Storage SD/SDHC/SDXC slot – minimum class 4; class 6 or better recommended Network Network 100Base-TX Cabling Type... -
Page 28: Limited Warranty & Technical Support
This warranty states Avigilon’s entire liability and your exclusive remedy against Avigilon for any failure of this product to operate properly. In no event shall Avigilon be liable for any indirect, incidental, special,...