Table of Contents
Advertisement
Copyright
All specifications and figures are subject to change without prior notice. Actual products may look
different from the photos.
All trademarks and logos mentioned in this guide are the properties of their respective holders.
Copyright © Delta Products Corporation. All rights reserved.
Regulatory and Safety Information
This product has been tested in accordance to, and complies with the following safety standards and
electromagnetic compatibility (EMC) inspection standards.
Emissions
Applicable standard
Safety
Applicable standard
Immunity
Applicable standard
RoHS
Applicable standard
Warning: Fiber Optic Port Safety
AG6248C Power-Over-Ethernet Switch
•
AS/NZS CISPR 22: Class A
•
ICES-003, Issue Class A
•
EN 55022: Class A
•
VCCI Class A
•
FCC CFR 47 Part 15, Subpart B Class A
•
EN 60950-1, Second Edition
•
UL/CSA 60950-1, Second Edition
•
IEC 60950-1, Second Edition Including All National
•
EN 300 386, EMC for Network Equipment
•
EN 55024:
•
EN 61000-3-2: Harmonic Current Emissions
•
EN 61000-3-3: Voltage Fluctuations and Flicker
•
EN 61000-4-2: ESD
•
EN 61000-4-3: Radiated Immunity
•
EN 61000-4-4: EFT
•
EN 61000-4-5: Surge
•
EN 61000-4-6: Low Frequency Conducted Immunity
•
EN61000-4-8: Power Frequency magnetic field
•
EN61000-4-11: Voltage dips and interruptions
All AG-Series components are EU RoHS compliant
When using a fiber optic port, never look at the transmit laser while it is powered
on. Also, never look directly at the fiber TX port and fiber cable ends when they are
powered on.
ii
Advertisement
Table of Contents
