Display And Operating Elements; Changing Over Display Mode For Media 6 With Lcd - Samson Media 6 Mounting And Operating Instructions

4.1 Display and operating elements

All the necessary information and measured
values stored in the instrument's memory
are shown in the display of Media 6 with
LCD. Although the Media 6 with LED ver-
sion does not have such a digital display,
important operating conditions are indi-
cated by the LED.
Three keys are used to operate the differen-
tial pressure meter:
Up key
Down key
Enter key
and a DIL switch with four switches to select
the type of gas and write protection function.
4.1.1 Changing over display mode
for Media 6 with LCD
Press the key to change over from the
standard display to seven other display
modes.
After 8 seconds or after the message has fin-
ished running across the display, the dis-
play returns automatically to the standard
display.
O2 e.g. gas name and current tank
content
∆P
current differential pressure
maximum capacity nominal
MCN
MCN/R 100 % capacity assigned to
20 mA signal
save capacity nominal
SCN
geometric capacity up to overflow/
gauge pipe
100 % capacity assigned to
SCN/R
20 mA signal
UCW useable capacity work
∆P100
maximum differential pressure
PTANK nominal tank pressure
Indicated value corresponds to the
pressure assigned to the density
as per vapor pressure diagram.
If the calculations for MCN and SCN
are based on density
abs, then 1 bar is shown for PTANK.
X-TANK-16 e.g. tank ID as running text
error message displayed auto-
ERROR
matically when an error occurs
(see section 8 on troubleshooting).
Special signal on opening the
OFF
equalizing valve, I = 3.6 mA
(refer to EB 9527-2, page 7).
Operation
(liquid)
at 1 bar
(liquid)
15
EB 9527-1 EN