Information About The Operating Instructions - Samson 024.85 Translation Of The Original Operating Instruction

Translation of the original operating instructions
Electrical position indicators type 024.85/024.86/024.87
1.1.

Information about the operating instructions

Safe operation
The operating instructions contain important information for safe and correct installation of the device.
Compliance with that helps preventing hazards, avoiding repair costs and downtime, and increasing reliability
and operating life of the device.
Target groups
The contents of these operating instructions are intended for installation and maintenance staff.
Reading the operating instructions
All persons who work at the device must read the operating instructions in order to be familiar with correct
handling and operation. The operating instructions contain important safety information! Non-compliance with
such information may cause hazardous situations. The operating instructions must be read and understood.
Copyright
The present operating instructions document is protected by copyright. Without written approval by SED Flow
Control GmbH it must not be reproduced, distributed, or unauthorizedly used for competitive purposes, either
in full or in parts.
All rights for drawings and other documents and any power of disposal are solely with SED Flow Control GmbH;
this also applies for cases of application for intellectual property rights.
Declaration of conformity
The device complies with the basic requirements of the applicable European directives. Conformity was
proved.
Technical changes
We constantly strive for further development and improvement of our devices. The data contained in this
edition correspond to the state of the art at the time of printing. All technical details with regard to information
and figures within the operating instructions are subject to change.
Warranty
The present printed document does not contain any guarantee commitments. For that purpose, please see our
general terms and conditions of delivery and payment. The prerequisite for statutory warranty is the intended
use of the device in compliance with the specified operating conditions.
The warranty only applies to absence of defectiveness of the device and its components. No liability will be
assumed for consequential damage occurring through failure or malfunction of the device, irrespective of their
nature.
Information on the internet
Instructions and data sheets for the device are provided on the internet at:
www.sed.samsongroup.com
© 1994 - 2021 SED Flow Control 29 BA210008 Version: a