Cisco ASR 900 Series Configuration Manual page 148

Verification Examples
• The following example shows a sample configuration of the Gigabit Ethernet interface with TSoP smart
Verification Examples
Verifying TSoP Smart SFP
• Use the show inventory command to display all TSoP Smart SFPs installed on the router.
• Use the show platform software ssfpd db command to display all TSoP Smart SFPs recognized by the
• Use the show platform software ssfpd db command with slot, bay and port to display specific TSoP
• Use the show hw-module subslot command to view information about TSoP Smart SFP.
Time Division Multiplexing Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
140
overhead j1 length 64
mode c-11
tug-2 1 t1 1 channel-group 0 timeslots 1
!
SFP installed:
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
no keepalive
service instance 1 ethernet
encapsulation untagged
xconnect 2.2.2.2 1 encapsulation mpls
!
Router# show inventory
NAME: "subslot 0/0 transceiver 7", DESCR: "TSoP OC-3/STM-1"
PID: ONS-SC-155-TSOP , VID: 01.0, SN: OES18100028
router.
Router# show platform software ssfpd db
=== Smart SFP info ===
dpidx: 14
mac : 00:19:3a:00:2f:18
port: 7
bay: 0
ssfp upgrade data store id: -1
ssfp is device upgrade safe: -1
upgrade percentage complete: 0
ssfp upgrade in progress: 0
Smart SFPs recognized by the router.
Router# show platform software ssfpd slot 0 bay 0 port 7 ssfp-d
port 7 ssfp-db
dpidx: 14
mac : 00:19:3a:00:2f:18
port: 7
bay: 0
ssfp upgrade data store id: -1
ssfp device upgrade safe: -1
Upgrade percentage_complete: 0
ssfp upgrade in progress: 0
Router# show hw-module subslot 0/0 transceiver 7 idprom
IDPROM for transceiver GigabitEthernet0/0/7:
Description = SFP or SFP+ optics (type 3)
Transparent SONET or SDH over Packet (TSoP) Protocol