Configuring The Protect Controller For Mr-Aps With Pseudowire Redundancy Active-Active - Cisco ASR 900 Series Configuration Manual

Time division multiplexing configuration; cisco ios xe fuji 16.7.x
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Configuring the Protect Controller for MR-APS with Pseudowire Redundancy Active-Active

Configuring the Protect Controller for MR-APS with Pseudowire
Redundancy Active-Active
Following example shows pseudowire redundancy active-active on MR-APS protect controller:
controller sonet 0/1/0
aps group 2
aps adm
aps unidirectional
aps protect 10 10.10.10.1
aps timers 1 3
aps l2vpn-state detach
aps hspw-icrm-grp 1
Verifying the Interface Configuration
You can use the following commands to verify your pseudowire configuration:
• show cem circuit—Displays information about the circuit state, administrative state, the CEM ID of
Router# show cem circuit
?
<0-504>
detail
interface
summary
|
Router# show cem circuit
CEM Int.
--------------------------------------------------------------
CEM0/1/0
CEM0/1/0
CEM0/1/0
CEM0/1/0
CEM0/1/0
• show cem circuit—Displays the detailed information about that particular circuit.
Router# show cem circuit 1
CEM0/1/0, ID: 1, Line State: UP, Admin State: UP, Ckt State: ACTIVE
Idle Pattern: 0xFF, Idle cas: 0x8, Dummy Pattern: 0xFF
Dejitter: 5, Payload Size: 40
Framing: Framed, (DS0 channels: 1-5)
Channel speed: 56
CEM Defects Set
Excessive Pkt Loss RatePacket Loss
Signalling: No CAS
Ingress Pkts:
Egress Pkts:
CEM Counter Details
Input Errors:
Pkts Missing:
Misorder Drops:
Error Sec:
Time Division Multiplexing Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
44
the circuit, and the interface on which it is configured. If xconnect is configured under the circuit, the
command output also includes information about the attached circuit.
CEM ID
Detailed information of cem ckt(s)
CEM Interface
Display summary of CEM ckts
Output modifiers
ID
Line
1
UP
2
UP
3
UP
4
UP
5
UP
25929
0
0
25927
0
26
Admin
Circuit
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
UP
ACTIVE
Dropped:
Dropped:
Output Errors:
Pkts Reordered:
JitterBuf Underrun:
Severly Errored Sec: 26
Configuring Pseudowire
AC
--/--
--/--
--/--
--/--
--/--
0
0
0
0
1

Advertisement

Table of Contents
loading

Table of Contents