2. Use the provided hardware to secure the RS-232 bracket to the 4007ES box.
3. Connect the free end of harness 734-308 to connector J17 (Zone/Relay) on the IDNAC PSU.
See the Dual RS-232 Interface Module installation instructions (579-910) for more information about installing the module.
7.1 Example of combinations
Figure 32: Example 1 on page 38 , Figure 33: Example 2 on page 38, and Figure 34: Example 3 on page 38 are examples of some of the
combinations that can be made in a 4007ES using the available optional cards and modules.
Page 38
Fig 32: Example 1
Fig 33: Example 2
Fig 34: Example 3
4007ES and 4007ES Hybrid Fire Alarm Systems Installation Manual
579-1102 Rev H