Alarm Relay Card; Trueinsight Service Gateway; Dual Class A Isolator; Example Of Combinations - Simplex 4007ES User & Installation Manual

Optional Modules and Cards, Continued

Alarm Relay Card

The Alarm relay card (4007-9809) is used to provide common unsupervised control functions
or indications for devices. Each relay module has three circuits (alarm, trouble, and supervisory
signals). It is not available when a city circuit card is used.
For more information on alarm relay card, refer to manual 579-955.
TrueInsight The remote service gateway (4190-6104) sends data to a remote service monitoring facility to
Service Gateway detail troubles in the panel. When the data reaches the monitoring facility, a qualified
technician is notified via e-mail and can then begin diagnostic process remotely.
For more information on the remote service gateway, refer to manual 579-953.
Dual Class A The Dual Class A Isolator (DCAI) (4007-9804) card converts the Class B output of the IDNAC
Isolator SLC into two isolated Class A outputs.
For more information on the DCAI, refer to manual 579-1029.
Example of Figure 6-1, Figure 6-2, and Figure 6-3 are examples of some of the combinations that can be
Combinations made in a 4007ES with the available optional cards and modules.
IDNet+ Loop
Expansion cards
BLOCK E
Power Supply
BLOCK J BLOCK K
BLOCK F
Relay Module
BLOCK I
Zone/Relay
Module
Figure 6-1. Example 1
6-2
Chapter 6 Optional Modules and Cards
Zone/Relay
Module
BLOCK G
BLOCK C
BLOCK H
BLOCK D
DACT
Module