Related Manuals for ACME LED-BL8
Summary of Contents for ACME LED-BL8
- Page 1 Stage Blinder P8 毅丰 2014.04.28 受控正本 LED-BL8 User Manual Innovation, Quality, Performance Please read the instructions carefully...
-
Page 2: Table Of Contents
Declaration of Conformity Contents We declare that our products (lighting equipments) comply with 1. Safety Instructions ................. 2 the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 2. Technical Specifications ..............4 2004/108/EC. -
Page 3: Safety Instructions
1. Safety Instructions 1. The stepper motor might be damaged or the cable connected to the PCB is broken. 2. The motor’s drive IC on the PCB might be out of condition. Please read the instructions carefully which includes important information about the installation, operation and maintenance. - Page 4 service, please contact your nearest dealer. 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), In the event of serious operating problem, stop using the fixture immediately. Pin4/5: not used Never try to repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
-
Page 5: Technical Specifications
2. Technical Specifications DMX 1/2/8/9 channels switchable. Smooth 0~100% dimming and variable strobe speeds. Two operation modes: DMX, Manual mode. Ideal for discotheques, clubs, bars, parties, Mobile DJs, etc. Input Voltage: AC 100V~240V 50/60Hz Total Power consumption: 800W ... -
Page 6: How To Set The Unit
saved manual address.（ D000-D100） 。 that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to 6. DMX512 Channel Mode support a weight of 10 times of the unit’s weight. -
Page 7: Main Function
○ display will close without any operation for I min. Once selected, press the ENTER 2 LED: button to setup or exit menu mode without any change after 30 seconds DMX input present automatically. Back to the functions without any change press the MENU button ○... - Page 8 or it will automatically return to the main functions without any change after idling exit menu mode without any change after 30 seconds automatically. To go back to 30 seconds. Back to the functions without any change press MENU button. The the functions without any change press the MENU button main functions are shown below: Manual Mode...