Operation; Testing The Safety System - Makita PT354D Instruction Manual

4.
place until it clicks.
in reverse.
Nose adapter
CAUTION:
Always make sure that your
the contact element and the battery cartridge is
removed before installing the nose adapter.
adapter, place it over the driver guide cover so that the
driver guide cover.
You can store the nose adapter on the holder on the
back end of the magazine to keep it from being lost.
4
3
1. Dent 2. Protrusion 3. Nose adapter 4. Holder
Hook
CAUTION:
Do not hang the hook from the
waist belt. Dropping the pin nailer, which is caused
by the hook accidentally coming out of place, may
housing on either side and then secure it with a screw.
1. Groove 2. Hook 3.
Hex wrench storage
When not in use, store the hex wrench as shown in the
1
2
1. Hex wrench

OPERATION

Testing the safety system

WARNING:
in working order before operation. Failure to do
so may cause personal injuries.
1
2
1.
element 4. Magazine
8 ENGLISH
1
2
3
1
Make sure all safety systems are
3
2.
4
3. Contact