Makita PT354D Instruction Manual
Cordless pin nailer
Hide thumbs
Also See for PT354D:
- Instruction manual (73 pages) ,
- Instruction manual (36 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita PT354D
Summary of Contents for Makita PT354D
- Page 1 INSTRUCTION MANUAL Cordless Pin Nailer PT354D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: PT354D Pin nail size ø0.6 mm x 15, 18, 25, 30, 35 mm Pin nail magazine capacity 100 pcs. Dimensions without hook (L x W x H) 231 mm x 80 mm x 226 mm Rated voltage D.C. 10.8 V - 12 V max... - Page 3 Dress properly. Do not wear loose clothing or Work area safety jewellery. Keep your hair, clothing, and gloves Keep work area clean and well lit. Cluttered or away from moving parts. Loose clothes, jewel- dark areas invite accidents. lery or long hair can be caught in moving parts. Do not operate power tools in explosive atmo- If devices are provided for the connection of spheres, such as in the presence of flammable...
- Page 4 Service • fitting transportation safety systems e.g. on vehicles and wagons. Have your power tool serviced by a qualified repair person using only identical replacement 14. Check walls, ceilings, floors, roofing and parts. This will ensure that the safety of the power the like carefully to avoid possible electrical tool is maintained. shock, gas leakage, explosions, etc. caused by stapling into live wires, conduits or gas pipes.
-
Page 5: Functional Description
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum ► 1 . Red indicator 2. Button 3. Battery cartridge... - Page 6 Overloaded: Trigger-lock button The tool is operated in a manner that causes it to draw an abnormally high current. CAUTION: In this situation, turn the tool off and stop the application Before installing the battery car- that caused the tool to become overloaded. Then turn tridge into the tool, always check to see that the the tool on to restart. switch trigger actuates properly and returns to If the tool does not start, the battery is overheated.
- Page 7 ASSEMBLY CAUTION: Always make sure that your fingers are not placed on the switch trigger or the contact element and the battery cartridge is removed before carrying out any work on the pin nailer. Loading the pin nailer CAUTION: Always make sure that the battery cartridge is removed before loading the pin nailer.
-
Page 8: Operation
After loading pin nails, push back the magazine in place until it clicks. To remove pin nails, follow the installation procedures in reverse. Nose adapter CAUTION: Always make sure that your fingers are not placed on the switch trigger or the contact element and the battery cartridge is removed before installing the nose adapter. When firing pin nails on the material with easily-marred surfaces, use the nose adapter. To install the nose ► 1 . - Page 9 Test safety systems for possible fault before operation If the head of the pin nail remains above the workpiece as follows. surface, drive the pin nail while holding the pin nailer head firmly against the workpiece. Unload pin nails from the tool and keep the maga- zine opened. Install the battery cartridge and release the trigger lock.
-
Page 10: Optional Accessories
CAUTION: These accessories or attachments are recommended for use with your Makita tool Take out pin nails that remain inside the magazine. specified in this manual. The use of any other Remove three screws with the hex wrench that are accessories or attachments might present a risk of securing the driver guide cover. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885563-916 www.makita.com 20161125...