sauter FH-S Instruction Manual

Thank you for buying a SAUTER force gauge. We hope
you are pleased with your high quality force gauge with its
big functional range. If you have any queries, wishes or
helpful suggestions, do not hesitate to call our service
number.
„Sensor Inside" means the measuring cell is inside the
housing.
Included in delivery
1.
- SAUTER FH incl. rechargeable battery
- Carrying Case
- Charger
- Standard Attachments as shown below,
5 pcs M3 x 8 screws
Pilot lamp
Force Sensor
RS-232 port
FH_SI-BA-e-1317
Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@sauter.eu
Instruction Manual
FH
FH-S Digitálny silomer(SK)
Power plug
Reset button
Display
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Sensor
Inside
Important annotation:
By pressing the RESET key (on the right side of housing,
see illustration on the left), individual settings and
memorised values can be re-set or erased, in example for
a new start of the instrument after an operating error.
Data in mm
Working Conditions
2.
10°C to 30°C / 15% up to 80% humidity
Electrical Power Supply
3.
Either by rechargeable battery or current power supply
Current power supply:
- Connection by power adapter
- Rechargeable
simultaneously
Rechargeable battery pack for mobile applications:
- Type: Ni 8.4V / 600 mAh
- Charging time: approx. 1 hour
batteries are charged
1