Front Wheels; Rear Wheels - Kubota LA340 Operator's Manual

TIRES, WHEELS, AND BALLAST
After driving the tractor 200 m (200 yards), af-
Timing to re-
ter 1 day (8 hours), and thereafter every
check the bolts
50 hours
NOTE :
• Use the tapered bolts for wheels with beveled or
tapered holes.

1. Front wheels

IMPORTANT :
• Do not turn the front discs to obtain wider tread.
• Always attach tires as shown in the figures in
the following table.
If you not attach the front wheel as illustrated in
the table, transmission parts may be damaged.
You can not adjust width of the front tread.
Tire
Tread
(A) 910 mm
(35.8 in.)
How to jack up the front axle
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as shown in the following
figure.
90
18x8.50-10 Turf, Bar, and Ind.
(1) Front axle case

2. Rear wheels

IMPORTANT :
• Do not the turn rear discs to obtain wider tread.
• Always attach tires as shown in the figures in
the following table.
If you not attach the rear wheel as illustrated in
the table, transmission parts may be damaged.
You can not adjust width of the rear tread.
Tire 26x12.00-12 Turf, Bar, and Ind.
Tread
(A) 820 mm
(32.2 in.)
How to jack up rear part of the tractor
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as shown in the following
figure.
WHEEL TREAD
(2) Jack points
BX23S, LA340, BT603