Table of Contents
Advertisement
REINSTALLING THE BACKHOE
REINSTALLING THE BACKHOE
HOW TO REMOVE THE
BACKHOE
WARNING
To avoid serious injury or death:
• When starting the engine, always sit in the
operator's seat.
• When getting off the tractor, make sure that the
PTO lever is off and the range-gear-shift-lever is
in the neutral position. Set the parking brake.
• Keep hands, feet, and body from between the
tractor and the backhoe. Never allow any part of
body under the machine.
• Make sure that the PTO of the tractor is
disengaged.
IMPORTANT :
• Before reinstalling the backhoe, set the engine
speed to low-idle.
1. Remove the 3-point hitch and / or drawbar (if
equipped).
2. Detach the mower if attached in position.
3. Make sure that the swing-lock-pin is installed.
4. Slowly back the tractor and the loader, centering to
the main frame of the backhoe.
5. Stop the tractor keeping at the following distance
from the backhoe.
Distance between the tractor
and the backhoe
6. Shut the engine off and set the parking brake.
7. Connect the inlet hose, outlet hose, and the power-
beyond-hose of the backhoe to the outlet hose, the
power-beyond-pipe and the return pipe of the
tractor.
164
254 mm to 304 mm
(10.0 in. to 12.0 in.)
HOW TO REMOVE THE BACKHOE
(1) Inlet hose (backhoe)
(2) Outlet hose (backhoe)
(3) Power beyond hose (back-
hoe)
IMPORTANT :
• Make sure that both hoses are firmly
connected before starting the engine.
8. Pull the mounting levers for left and right mounting
pins of the main frame of the backhoe to release
mounting pins.
(1) Mounting lever
9. Restart the engine.
WARNING
To avoid serious injury or death:
• Do not move the joystick-control-lever to the
swing position.
(4) Outlet hose (tractor)
(5) Return pipe (tractor)
(6) Power beyond pipe (tractor)
BX23S, LA340, BT603
Advertisement
Table of Contents
