OPERATING THE ENGINE
3. Place the speed-set-rod in the off position.
(1) Speed set rod
(A) On
4. Place the speed-control-pedal in the neutral
position.
(1) Speed control pedal
NOTE :
• The
speed-control-pedal
returns to the neutral position when the
operator's foot is released from the speed-
control-pedal.
5. Place the range-gear-shift-lever (Hi-Lo) in the
neutral "N" position.
58
(B) Off
automatically
(1) Range gear shift lever (Hi-
Lo)
(A) Low
6. Lock the loader-control-lever in the lock position if
equipped.
(1) Loader control lever
(2) Lock lever
7. Move
the
hydraulic-control-lever
lowered
(down)
implement.
(1) Hydraulic control lever
(A) Raised
(B) Lowered
Check that the implement is down at the lowest
position after moving the hydraulic-control-lever
forward.
STARTING THE ENGINE
(B) Neutral
(C) High
(A) Lock
forward
(the
position)
to
lower
the
(N) Neutral position
BX23S, LA340, BT603