Table of Contents
Advertisement
OPERATING THE TRACTOR
(1) PTO clutch lever
(A) On (engage)
2. Lower all implements to the ground.
See
1. Hydraulic control on page
(1) Hydraulic control lever
(A) Down
(B) Slow down
(C) Neutral
3. Place all control levers in their neutral positions.
4. Set the parking brake.
See "To set the parking brake" in
the parking brake on page
(1) Brake pedal
(2) Parking brake lock pedal
(A) Depress
5. Stop the engine.
See
STOPPING THE ENGINE on page
72
(B) Off (disengage)
84.
(D) Slow up
(E) Up
3.1 How to use
48.
(B) Push down parking brake
lock pedal while depressing
brake pedal
60.
TECHNIQUES FOR OPERATING THE TRACTOR
6. Remove the starter key.
7. If it is necessary to park the tractor on an incline, be
sure to chock the wheels to prevent accidental
rolling of the tractor.
TECHNIQUES FOR OPERATING
THE TRACTOR
1. Differential lock
WARNING
To avoid serious injury or death due to loss of
steering control:
• Do not operate the tractor at high speed with
differential lock engaged.
• Do not turn with the differential lock engaged.
• Be sure to release the differential lock before
turning the machine in field conditions.
If one of the rear wheels should slip, depress the
differential-lock-pedal. Both wheels will then turn
together, which reduce slippage of the rear wheels.
The differential lock is maintained only while the
differential-lock-pedal is depressed.
(1) Differential lock pedal
(A) Press to engage
IMPORTANT :
• When using the differential lock, always slow
the engine down.
• To prevent damage to power train, do not
engage the differential lock when one wheel is
spinning and the other is completely stopped.
• If the differential lock cannot be released in the
preceding manner, alternately press the speed-
control-pedal forward and backward slightly.
(B) Release to disengage
BX23S, LA340, BT603
Advertisement
Table of Contents
