Table of Contents
Advertisement
SAFE OPERATION
(1) Safety chain
• Set the implement-lowering-speed-knob in the lock
position to hold the implement in the raised
position.
(1) 3-point hitch lowering speed
knob
(A) Fast
3. Precautions for parking the tractor
• Disengage the PTO, lower all implements to the
ground, place all control levers in their neutral
positions, set the parking brake, stop the engine,
remove the key from the ignition, and lock the cab
door if equipped. Leaving the transmission in gear
with the engine stopped will not prevent the tractor
from rolling.
10
(B) Slow
(C) Lock
(1) Brake pedal
(2) Parking brake pedal
(A) Depress
• Make sure that the tractor has come to a complete
stop before dismounting from the tractor.
• Avoid parking on steep slopes. If it is at all possible,
park on a firm and level surface. If it is not at all
possible to park on a firm and level surface, park
across a slope and chock the wheels.
Failure to comply with the preceding warning may
allow the tractor to move and could cause injury or
death.
4. Precautions for operating the PTO
• Wait until all moving components have completely
stopped before getting off the tractor, connecting,
disconnecting, adjusting, cleaning, or servicing any
PTO driven equipment.
• Keep the PTO-shaft-cover in place at all times.
Replace the PTO-shaft-cap when the shaft is not in
use.
(1) PTO shaft cover
(2) PTO shaft cap
(A) Normal position
• Before
installing
equipment, read the manufacturer's manual and
review the safety labels attached to the equipment.
• When
operating
equipment, always apply the parking brake of
tractor and place the chocks behind and in front of
(B) Push down parking brake
pedal while depressing
brake pedal
(B) Raised position
or
using
the
PTO-driven-
the
stationary
PTO-driven-
BX23S, LA340, BT603
Advertisement
Table of Contents
