Table of Contents
Advertisement
HITCH
1. How to use the 3-point hitch
When installing the backhoe, remove the 3-point hitch.
(1) Top link
(2) Clevis pin
(3) Snap ring
Removing the 3-point hitch
1. Remove the lynch pin and the top link pin. Then remove the top link.
2. Remove the snap ring and the clevis pin. Then remove the left and right lifting rod.
3. Remove the snap pin and the stopper pin. Then remove the check chain plate and lower links.
Installing the 3-point hitch
1. Follow the reverse of the procedure of "Removing the 3-point hitch".
BX23S, LA340, BT603
(4) Lifting rod (left)
(5) Lower link
(6) Stopper pin
3-POINT HITCH AND DRAWBAR
(7) Snap pin
(8) Check chain plate
(9) Top link pin
(10) Lynch pin
(11) Lifting rod (right)
83
Advertisement
Table of Contents
