Table C-1 Maintenance Error Table - Vislink UltraDecoder Operator's Manual

There is no routine maintenance required for this unit. However, it is good practice to
regularly check the unit has adequate airflow by keeping the rear and side ventilation grills
clear of obstructions.
The following fault conditions may occur. The suggested remedial action is described.
Error Message
Clock Error
Over Temperature
Encoder Fault
Fan 1 Stopped
Fan 2 Stopped
Issue: 4
Ref: ULTD-ASUM-7001
Suggested Remedial Action
Replace internal back up battery – refer to factory/agent.
Check ventilation grilles on each side of unit are free of obstructions.
Check fans are running.
Restart unit. If the fault continues, refer to factory/agent.
Refer to factory/agent for spares.
Refer to factory/agent for spares.
Table C-1 Maintenance Error Table
UltraDecoder Operators Manual
Remote Control
Copyright © 2016 Vislink plc
39