Table of Contents
Advertisement
im Vertrieb von
6
Operating the PL-18 Control Port Expander
The PL-18 is typically used to expand the number of ports available to an
RC series remote control device. The combined RC
configured from the RC device using RC-SV software that can be
downloaded from the Kramer Web site
The PL-18 can also be operated directly from a PC, touch screen system, or
other serial controller using the serial commands of Kramer's Protocol
3000. For an explanation of all control commands, see section
In addition to operating the PL-18, machine software can be upgraded, and
device parameters can be accessed and changed using P3K Wizard software
also available from the Kramer Web site
7
Technical Specifications
The PL-18 technical specifications are shown in
Table 2: PL-18 Control Port Expander Technical Specifications
PORTS:
OUTPUTS:
LED INDICATORS:
POWER SOURCE:
DIMENSIONS
WEIGHT:
ACCESSORIES:
OPTIONS:
1 When configuring an RC-2 to work with the PL-18, the RC-SV software version must be at 2.1.2.32 or higher and the RC-2
firmware version must be at 1573 or higher
2 At
www.kramerelectronics.com
3 Specifications are subject to change without notice
www.camboard.de
6
CAMBOARD Electronics
Operating the PL-18 Control Port Expander
2 bi-directional RS-232 ports on terminal block connectors; 1 USB
4 relays on terminal block connectors, 36V AC or DC, 1A, 60V AC max on non-
inductive load; 2 IR outputs on 3.5mm mini jack connector
ON (green), RS-232 (Tx - red and Rx - green), IR (green), relays (green)
5V DC, 260mA
12cm x 7.6cm x 2.4cm (4.72" x 2.97"x 0.96") W, D, H
0.6kg (1.4lbs)
Power supply 5V DC
15 meter and 20 meter IR emitter extension cables
Tel. 07131 911201
Fax 07131 911203
1
and PL-18 are
2
.
2
(see section 10).
Table
2:
ce-info@camboard.de
KRAMER: SIMPLE CREATIVE TECHNOLOGY
9.
3
Advertisement
Table of Contents
