Code 39; Code 128 - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Chapter 5: Configuration
Decoded (Internal) Scanners

Code 39

Delete Char Set ECIs
Setting this parameter to on enables the scanner to delete any escape sequences representing
Character Set ECIs—Extended Channel Interpretations (also known as GLIs)—from its
buffer before transmission.
When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417
bar codes containing Character Set ECIs, even when the ECI Protocol is disabled.
ECI Decoder
Setting this parameter to on enables the scanner to interpret any Extended Channel Interpre-
tations (ECIs) supported by the scanner. This parameter has no effect on symbols that were
not encoded using ECIs.
If this parameter is set to OFF and a symbol that was encoded using an ECI escape is
scanned, the scanner transmits the ECI escape followed by the data that was not interpreted.
5.14.2.5

Code 39

Enabled
Setting this parameter to on enables "Code 39".
Enable Trioptic Code 39
Note: "Trioptic Code 39" and "Full ASCII" should not be enabled simultaneously. The
scanner does not automatically discriminate between these two symbologies.
Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allows
this type of symbology to be recognized.
Convert To Code 32
Note: "Code 39" must be enabled in order for this parameter to function.
Setting this parameter to on allows the scanner to convert the bar code from "Code 39" to
"Code 32".
Code 32 Prefix
Note: "Convert to Code 32" must be enabled in order for this parameter to function.
168 Ikôn Rugged PDA (Windows CE 5.0) User Manual