Restoring Default Settings - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Important: To improve the decode speed and performance, enable only those codes that
Keep in mind that some bar code types are only available when an internal imaging scanner
is installed. All internal scanners can be configured using the Barcode dialog boxes.
5.14.1.2

Restoring Default Settings

If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters or all scanner parameters.
• Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu.
• Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
are required by the application.
Ikôn Rugged PDA (Windows CE 5.0) User Manual
Chapter 5: Configuration
Bar Codes

Restoring Default Settings

163