Active Conn - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices
(one at a time), but you have the freedom to switch on-the-fly.
The Outgoing Port checkbox allows you to create the Outgoing port. When the port is cre-
ated, the Outgoing menu lists the port name.
The Outgoing list dialog box displays a list of services marked as 'Outgoing'. The * column
indicates the currently selected service. You can tap on Unselect to reset the current selec-
tion, or you can tap on Select to make a selection. The Remove button deletes the service
from the outgoing list.
The Prompt menu determines the behaviour of the pop-up Selection menu. Choosing
Everytime causes the Selection menu to be displayed each time an outgoing port is created.
If you choose Once, the menu is displayed only when a partner service is not selected.
To display the Selection menu at any time:
• Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device.
If a connection to a partner device already exists, the connection is dropped and another con-
nection to the newly selected device is created instantly without disrupting the application
that has opened the outgoing port.
Note: To add a service to the Outgoing port, an active service must first be deactivated.
Then you can choose the 'Outgoing' option from the Activation menu (highlight a
service, right-click or press the [SPACE] bar to display the Activation menu).
5.6.1.5

Active Conn.

The Active Conn. menu lists the Name, Address, and Type of the currently active connec-
tions. The table is periodically updated, but it can take a few seconds before it reflects the
Ikôn Rugged PDA (Windows CE 5.0) User Manual
Chapter 5: Configuration
Bluetooth Setup
117