Scanner/Imager Specifications; Se 955Hp Specifications - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Max. charge voltage
Recommended charge termina-
tion timeout
Charge Temperature
Discharge Temperature
Storage Temperature
Cycle Life
7.4

Scanner/Imager Specifications

7.4.1

SE 955HP Specifications

Scan Angle
Scan Rate
Scan Pattern
Wavelength
Input Voltage
Input Current
Standby Current
Operating Temperature
Print Contrast
Dimensions
Symbologies
Description
47° ± 3° default / 35° ± 3° reduced
104 (± 12) scans/sec (bi-directional)
Linear
650nm
3.0-5.5 VDC ± 10%
65 mA typical
8 µA max
-20° to 60° C
-4° to 140°F
Minimum 25% absolute dark/light reflectance measured at 650 nm
1.21 cm H x 2.16 cm W x 1.55 cm (max)
0.47 in. H x 0.85 in. W x 0.61 in. D (max)
UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5,
Codabar, MSI Plessey
4.2V +/- 1%
5.0 hr - charging must stop.
0°C to +40°C (32°F to +104°F)
-20°C to +50°C (-4°F to +122°F)
-20°C to +50°C (-4°F to +122 ºF). Storage at elevated tempera-
tures not recommended.
25°C (77 ºF)—recommended storage temperature.
300 cycles minimum with no degradation below 80% of
nominal capacity based on 1C charge / 1C discharge rates
(to 3.0V) @ 25°C (77 ºF).
Ikôn Rugged PDA (Windows CE 5.0) User Manual
Chapter 7: Specifications

Scanner/Imager Specifications

Specification
259