Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual page 226

Chapter 6: Peripheral Devices & Accessories
Attaching The Handstrap With Tether (Model No. CH6021)
3. Slide the bracket through the plastic loop on the handstrap and install the screws.
4. Adjust the handstrap by pulling up the Velcro tab and readjusting to your hand
as needed.
Attaching The Stylus Tether To The Handstrap
The stylus tether can be attached to the handstrap at the back of the Ikôn.
1. If not assembled, thread the tether cord through the stylus as shown, pulling the
cord tight.
214 Ikôn Rugged PDA (Windows CE 5.0) User Manual