Table of Contents
Advertisement
5
Fit the tray in
･
Firmly press so that the tray and the main body are in the same
plane (no difference in level).
Removing
1
Insert the tip of SIM ejector into the hole for
ejecting tray
P.24
→
2
Draw the tray straight
3
Remove the microSD card from the tray
4
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
→
P.25
5
Fit the tray in
･
Firmly press so that the tray and the main body are in the same
plane (no difference in level).
→
P.25
Charging
Precautions on charging
･
If you use applications while charging, it may take time to complete
charging or charging may not complete due to drop-off of battery.
･
It is normal for the terminal or AC adapter to become warm while
charging. When the terminal becomes warm, charging may stop
temporarily for the safety. When the terminal becomes extremely
hot, stop using immediately.
･
If you start charging with the battery run out, the terminal may not
activate immediately after the power is turned on. In that case,
charge with the terminal kept turned off for a while, then turn the
power on.
･
For charging time, see "Main specifications".
Internal battery life
･
The internal battery is a consumable part. Each time the internal
battery is recharged, the battery usage time per one charge
gradually decreases. Calling etc. for a long time while charging may
shorten the lifetime of the internal battery.
･
You can check performance (charging ability) of the internal battery
from "About phone".
→
･
When the battery usage time per one charge becomes about half
of that at the time of purchase, replacing the internal battery is
recommended because the internal battery is near the end of life.
28
→
P.134
P.109
Before Using the Terminal
Advertisement
Table of Contents
